Answer
Apr 02, 2025 - 06:38 AM
Hello,
These vents are designed to be screwed into the sides of the vent opening. You should see the pre-drilled holes on the sides of the diffuser. Here’s how to install them properly:
1. Place the vent in the space where it will be installed.
2. Use a squeegee or putty knife to separate the louvers between each slot. This will allow you to access the xxxx holes through the front of the vent.
3. Use a Phillips head extended drill bit or a long screwdriver to properly secure the vent in place.
4. Once installed, use the same squeegee or putty knife to adjust the louvers to direct airflow as needed. Each box includes a small infographic note that shows how to position the louvers.
For a visual guide, please check out the attached video.
Thank you, and have a great day!
These vents are designed to be screwed into the sides of the vent opening. You should see the pre-drilled holes on the sides of the diffuser. Here’s how to install them properly:
1. Place the vent in the space where it will be installed.
2. Use a squeegee or putty knife to separate the louvers between each slot. This will allow you to access the xxxx holes through the front of the vent.
3. Use a Phillips head extended drill bit or a long screwdriver to properly secure the vent in place.
4. Once installed, use the same squeegee or putty knife to adjust the louvers to direct airflow as needed. Each box includes a small infographic note that shows how to position the louvers.
For a visual guide, please check out the attached video.
Thank you, and have a great day!
